The construction and house finishing industries use a wide variety of standardized and non-standardized metal parts, ranging from metal profiles to pipes and fasteners that are used in large quantities, especially structural steel. The identification and traceability of these critical metal parts is critical to the quality and longevity of the work, and many of these manufacturers use cost-effective and fast peen markers to mark the parts.Fast: to mark with same specific depth such as 0.3mm, our peen marking machine is 8~10X faster than a 100W fiber laser system;Depth: our peen marking machine offer 0.1~0.3mm depth in one pass, and able to precise repeat for deeper marks;Traceability: in addition to serial numbers or date marks, our peen markers can mark scannable DPM or QR codes for digital management.

In fact, the more dominant technology for direct part marking (DPM) is the use of lasers, especially for smaller metal parts and other non-metallic materials such as screws, PVC pipe, wire, glass, etc. In addition, laser marking can be used to create easy-to-read warning labels. In addition, laser marking can be used to create easy-to-read signs for electrical systems, escape route lights, etc.Quiet: laser marking of metal also generates noise especially deep engraving, but this is negligible compared to the peen marking process;Accuracy: Laser marking can mark metal in extremely small size, such as 2*2mm square UDI code or 0.03mm line width characters, which are impossible for peen marking;Visibility: Using MOPA fiber or UV laser for laser annealing instead of engraving for black or other color marking on metal workpiece with high contrast.

From pre-engineered steel structures to metal roofing and curtain walling, from pipes to windows, doors and fences, all can benefit from efficient laser welding. Laser welding is much more efficient than conventional TIG, MIG or MAG welding, allowing you to complete jobs quickly, while providing consistent and reliable weld depths and strengths, allowing you to provide excellent service to your customers.Easy to use: extremely consistent weld quality that requires less operator skill than TIG and MIG welding;Precise: QCW or MOPA fiber laser welding system produces extremely small spots and weld marks for high-precision welding of thin sheets, films, electronic circuits and more;Easy to automate: the physical structure of laser welding is simpler than that of TIG and MIG, which facilitates the development and use of automated welding.

Unlike other industries, only state-of-the-art pulsed laser cleaning technology is commonly used and recognized in these industries. Because pulsed laser cleaning is virtually non-destructive to most stone, glass and wood, it can be used to efficiently and non-destructively remove dust, dirt, metal rust and old paint from historic stone and wood buildings as well as the glass exteriors of modern buildings or concrete structures.Efficiency: the high-energy laser beam vaporizes contaminants in a very short time with minimal damage to the workpiece.Non-consumable: laser cleaning can be operated without detergents or catalysts, a significant savings for high-volume industrial metal derusting.Non-contact: laser beam can remove rust, oxides, oil, grease, paint and coating at a distance, therefore suitable to clean hard-to-touch workpiece such as injection mold.